HP dv9000 manual Removing the Display Lid Switch Module

Removal and Replacement Procedures

2.Remove the display lid switch module by firmly pulling it off the fan/heat sink assembly.

✎The display lid switch module is secured to the fan/heat sink assembly by 2-sided tape. Apply removal force to the middle of the module to remove it.

Removing the Display Lid Switch Module

✎The display lid switch module cable is included with the display lid switch module spare part kit and is also included in the Cable Kit, spare part number 434677-001.

Reverse the above procedure to install the display lid switch module.

Maintenance and Service Guide 5–69