Setup Utilities and Diagnostics Features
Heading | Option | Description |
|
|
|
Integrated | Onboard Serial | Allows you to select a setting for the onboard serial port: |
Peripherals | Port | • Disabled |
(continued) |
| |
| • 3F8/IRQ4 | |
|
| |
|
| • 2F8/IRQ3 |
|
| • 3E8/IRQ4 |
|
| • 2E8/IRQ3 |
|
|
|
| Onboard Parallel | Allows you to select a setting for the onboard parallel port: |
| Port | • Disabled |
|
| |
|
| • 378/IRQ7 |
|
| • 278/IRQ5 |
|
| • 3BC/IRQ7 |
|
|
|
| Parallel Port Mode | Allows you to select parallel port mode: |
|
| • SPP |
|
| • EPP |
|
| • ECP |
|
| • ECP+EPP |
|
| • Normal |
|
|
|
| ECP Mode Use | If Parallel Port Mode is set to ECP or ECP+EPP, allows you to set |
| DMA | the DMA channel for ECP Mode to 1 or 3. |
|
|
|
Power | After AC Power | Allows you to select system power loss behavior: |
Management | Loss | • On |
Setup |
| |
| • Off | |
|
| |
|
| • Last State |
|
|
|
| ACPI Suspend | ACPI sleep mode is S3 (Suspend To RAM) |
| Type |
|
|
|
|
| External Modem | Disables/enables |
| S5 |
|
|
|
|
| RTC Alarm Resume | Disables/enables RTC alarm. |
|
|
|
| Date (of Month) | If RTC Alarm Resume is enabled, allows you to select the day of |
|
| the month for resumption of RTC alarm. (Set to 0 for every day.) |
|
|
|
| Resume Time | If RTC Alarm Resume is enabled, allows you to select what time |
| (hh:mm:ss) | the RTC alarm will resume. |
|
|
|
PnP/PCI | Reset | Disables/enables automatic reconfiguration. |
Configurations | Configuration | The default is Disabled. Select Enabled to reset Extended |
| Data | System Configuration Data (ESCD) when you exit Setup, if you |
|
| have installed a new |
|
| caused such a serious conflict that the OS cannot boot. |
|
|
|
Service Reference Guide, dx2200 MT |