Removal and Replacement Procedures— Microtower (MT) Chassis
6.9.1Power Switch Assembly
1.Prepare the computer for disassembly (Section 6.1, “Preparation for Disassembly”).
2.Remove the access panel and rotate the computer so the system board is parallel to the table to make it easier to work on (Section 6.2, “Access Panel”).
3.Disconnect the braided Power/LED cables from the system board.
4.Free the braided cables from the cable tie that is attached to the chassis.
5.Squeeze the top of the switch holder 1. rotate the switch, and remove it from the chassis.
To install the power switch assembly, reverse the removal procedures.
Service Reference Guide, dx2200 MT |