Removal and Replacement Procedures— Microtower (MT) Chassis

Device

 

Retainer Screws

Guide Screws

 

 

 

 

Diskette Drive

2

(labeled “FDD” on chassis)

1 (front left side of

 

 

 

drive)

 

 

 

 

Media Card

2

(labeled “CR” on chassis)

none

Reader

 

 

 

 

 

 

 

✎If you are installing a drive in the external 3.5" drive bay for the first time, use a flatblade screwdriver to pry out the metal shield covering the bay.

✎There are a total of eight extra guide/retainer screws on the front of the chassis behind the bezel. Four have Unified Standard (U.S.) #6-32 standard threads and four have M3 metric threads. U.S. screws are used for hard drives and have a silver finish. Metric screws are used for all other drives and have a black finish. Be sure to install the appropriate guide screws into the drive.

Service Reference Guide, dx2200 MT

415606-001

6–15