Display assembly

Description

Spare part number

 

 

15.4-inch, WXGA, BrightView display assembly for use with computer models equipped with a

446481-001

camera and microphones (includes camera, microphones, and WLAN transceivers and antenna

 

cables)

 

 

 

15.4-inch, WXGA, BrightView display assembly for use with computer models equipped with

446482-001

microphones (includes microphones and WLAN transceivers and antenna cables)

 

 

 

Before removing the display assembly, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4. Remove the battery (see Battery on page 36).

5. Remove the memory/WLAN module compartment cover (see Memory module on page 43).

6. Disconnect the wireless antenna cables from the WLAN module (see WLAN module on page 46).

7. Remove the keyboard (see Keyboard on page 53).

8. Remove the switch cover (see Switch cover on page 49).

Remove the display assembly:

1. Close the computer and turn it upside down, with the rear panel toward you.

2. Remove the Phillips PM2.5×8.0 screws that secure the display assembly to the computer.

3. Turn the computer display-side up, with the front toward you.

4. Open the computer to an upright position.

Component replacement procedures 55