USB/power connector board

Description

Spare part number

 

 

USB/power connector board

449454-001

 

 

Before removing the USB/power connector board, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4. Remove the battery (see Battery on page 36).

5. Remove the following components:

a. Hard drives (see Hard drives on page 41)

b. Optical drive (see Optical drive on page 47)

c. Switch cover (see Switch cover on page 49)

d. Keyboard (see Keyboard on page 53)

e. Speaker assembly (see Speaker assembly on page 51)

f. Display assembly (see Display assembly on page 55)

g. Top cover (see Top cover on page 61)

Remove the USB/power connector board:

1. Disconnect the USB cable (1) and power connector cable (2) from the system board.

2. Remove the USB/power connector board cable from the clips (3) built into the base enclosure.

3. Remove the Phillips PM2.5×5.0 screw (4) that secures the USB/power connector board to the base enclosure.

Component replacement procedures 67

Page 75
Image 75
HP DX6500 manual USB/power connector board