2. Disconnect the power button board cable (2) and the LED button board cable (3) from the low insertion force (LIF) connectors on the system board.
3. Remove the power button board cable and LED board cable.
4. Turn the computer upside down, with the front toward you.
5. Remove the following screws:
(1)Six Phillips PM2.5×8.0 screws that secure the top cover to the computer
(2)Two Phillips PM2.5×6.0 screws that secure the top cover trim to the computer
(3)Two Phillips PM2.5×8.0 screws that secure the top cover trim to the computer
62 Chapter 4 Removal and replacement procedures