●Top cover (see Top cover on page 57)

●Speakers (see Speakers on page 65)

●USB board (see USB board on page 67)

●Power connector cable (see Power connector cable on page 69)

●Display assembly (see Display assembly on page 71)

●System board (see System board on page 80)

●Fan/heat sink assembly (see Fan/heat sink assembly on page 86) To remove the processor:

1.Use a flat-bladed screw driver (1) to turn the processor locking screw one-half turn counterclockwise (2) until you hear a click.

2.Lift the processor (3) straight up, and then remove it.

NOTE: The gold triangle (4) on the processor must be aligned with the triangle icon embossed on the processor socket when you install the processor.

Reverse this procedure to install the processor.

ENWW

Component replacement procedures 91