HP F2400 manual Use ink-backup mode, Cartridge warranty information, Exit ink-backup mode

Models: F2400

1 69
Download 69 pages 62.53 Kb
Page 39
Image 39

Chapter 7

d. Close cartridge door.

4.Align cartridges.

Related topics

Choose the right cartridges” on page 32

Order ink supplies” on page 31

Use ink-backup mode

Use the ink-backup mode to operate the HP All-in-One with only one print cartridge. The ink-backup mode is initiated when a print cartridge is removed from the print cartridge carriage. During ink-backup mode, the product can only print jobs from the computer.

NOTE: When the HP All-in-One operates in ink-backup mode, a message is displayed on screen. If the message is displayed and two print cartridges are installed in the product, verify that the protective piece of plastic tape has been removed from each print cartridge. When plastic tape covers the print cartridge contacts, the product cannot detect that the print cartridge is installed.

Work with cartridges

Exit ink-backup mode

Install two print cartridges in the HP All-in-One to exit ink-backup mode.

Related topics

Replace the cartridges” on page 34

Cartridge warranty information

The HP cartridge warranty is applicable when the product is used in its designated HP printing device. This warranty does not cover HP ink products that have been refilled, remanufactured, refurbished, misused, or tampered with.

36 Work with cartridges

Page 39
Image 39
HP F2400 manual Use ink-backup mode, Cartridge warranty information, Exit ink-backup mode