Connecting the TV signal source with a set-top box and using S-video or composite video cable

To use video output from the set-top box (F), add the cables to route video and audio to the computer:

￿ Do not detach any cables from the existing setup.

￿Connect an S-video cable (or you can use an S-video-to-composite cable adapter) to the S-Video In connector (H) on the computer.

￿ Connect audio cables to the Audio In right (red) and left (white) connectors (J) on the computer.

￿ Connect the remote control cable/IR blaster (select models only) (G) to the IR OUT connector on the computer, and then position the blaster on the set-top box. This enables the computer to change the channel on the box. See “Using an infrared receiver (IR) blaster” on page 12 for blaster placement details.

Callouts

A TV signal cable (coaxial) wall outlet (from antenna or cable)

BSplitter

CComputer coaxial TV In connector

DVideo recorder

ETV

FSet-top box/satellite box

GRemote control IR blaster cable (select models only)

HComputer S-video In connector

JComputer right and left Audio In (analog) connectors

Setting Up Your Computer 11