HP Elite manual 39

Wireless keyboard and mouse (continued)

Symptom Possible solution

Wireless keyboard or mouse does not work or is not detected. (continued)

3Check that the mouse is on (B), and push and hold the Connect button (C) on the underside of the mouse for

5 to 10 seconds until the LED (A) on the receiver lights or stops flashing.

				NOTE: The receiver
				connection session
			C	times out after
	Off			60 seconds. To ensure
B		Connect
	On			the connection was
				established, and that
				the receiver did not
				time out instead, move
				the mouse and check
				for response on the
				screen.

4After the mouse connection is established, continue with the steps that follow to repeat the procedure for the keyboard.

5Skip this step if your receiver model has no Connect button (A).

Push the Connect button on the receiver (A), and hold it for 5 to 10 seconds until the light starts to flash.

6Push and hold the Connect button (D) on the underside of the keyboard for 5 to 10 seconds until the LED (A) on the receiver lights or stops flashing.

D

Troubleshooting and Maintenance 35