HP Elite Wireless keyboard and mouse (continued)

Wireless keyboard and mouse (continued)

Symptom

Wireless keyboard or mouse does not work or is not detected. (continued)

Possible solution

Resynchronize the keyboard and mouse to the receiver:

The receiver, wireless keyboard, and wireless mouse shown in the illustrations are examples; your models may vary.

IMPORTANT: During these steps, place the wireless keyboard and wireless mouse on the same level as the receiver, within 30 cm of the receiver, and away from interference from other devices.

1Unplug the receiver from a USB connector on the computer, and then reconnect it. Your computer model may have a connector dedicated to the receiver. If you have a choice, use a USB connector on the front of the computer.

2The receiver may have an LED light or a Connect button, which is also an LED light. Skip this step if your receiver has no Connect button (A).

A	Push the Connect
	button (A) on the
	receiver (which is also the
	LED light), and hold it for
	5 to 10 seconds until the
	light starts to flash.

34Getting Started (features vary by model)