HP HD 5210 manual Recording a Video, Application Help

Recording a Video

1Do either of the following to open ArcSoft WebCam Companion and enter capture mode:

￿Press the Video Record button on your webcam.

￿Double-click the HP Webcam Control Center icon on the Windows desktop, and then click Record Video .

2(Optional) Click Full Screen to record in full-screen mode.

3(Optional) Click the resolution list below the icons in the upper-right corner, and select the resolution setting you want to use for the recording. The default setting is 1280x720 (HD 720p), which provides optimum performance in most environments.

NOTE: Higher resolutions and/or poor lighting may slow down the frame rate and make the video jerky. For more information on resolution issues, see “Troubleshooting.”

4Press the Video Record button or click Record Video to begin recording.

5Press the Video Record button again or click Stop Recording to stop recording and save the video to your PC.

6If you’re recording in full-screen mode, click the Exit icon on the right side of the screen to return to partial-screen mode.

To learn more about using ArcSoft WebCam Companion, click Extras and select

Application Help.

HP Webcam HD 5210 User’s Guide 7