About this printer

Positioning the printer

Please read the following before you use the printer.

Power supply

1

Use the printer within the recommended power range.

Power source:

USA and Canada:

AC 110 to 120 V, 50/60 Hz

 

Europe and Australia:

AC 220 to 240 V, 50/60 Hz

The power cord, including extensions, should not be longer than 5 meters (16.5 feet).

Do not share the same power circuit with other high-power appliances, such as an air conditioner, copier, shredder and so on. If you cannot avoid using the printer with these appliances, we recommend that you use a voltage transformer or a high-frequency noise filter.

Use a voltage regulator if the power source is not stable.

Environment

■You should setup the printer near a power outlet that you can easily reach, so that it can be easily unplugged from the power outlet if there is an emergency.

■Only use the printer within the following ranges of temperature and humidity:

Temperature: 10 °C to 32.5 °C (50 °F to 90.5 °F)

Humidity: 20% to 80% (without condensation)

■You should use the printer in a well-ventilated room.

■Put the printer on a flat, horizontal surface.

■Keep the printer clean. Do not put the printer in a dusty place.

■Do not put the printer where the ventilation hole of the printer is blocked. Keep a gap of approximately 100 mm (4 in.) between the ventilation hole and the wall.

■Do not put the printer in direct sunlight. If you have to put it near a window, use a blind or a heavy curtain to protect the printer from direct sunlight.

■Do not put the printer near devices that contain magnets or generate magnetic fields.

■Do not subject the printer to strong physical shocks or vibrations.

■Do not expose the printer to open flames, salty or corrosive gasses.

■Do not put objects on top of the printer.

■Do not put the printer near an air conditioner.

■Keep the printer horizontal when you carry it.

1 - 3