About this printer

3While pressing the blue paper-guide release lever, slide the paper guides to fit the paper size. Check that the

guides are firmly in the slots.

1

4Put paper in the tray.

5Check that the paper is below the maximum paper mark (▼).

Note

• Paper jams may occur if you put more than 250 sheets (80 g/m2 or 21 lb) of plain or bond paper in the paper tray at any one time.

• Paper jams may occur if you put more than 10 transparencies in the paper tray at any one time.

•When you use pre-printed paper, put the side that is going to be printed on (blank side) face down, with the top of the paper at the front of the tray.

6Put the paper tray firmly back in the printer. Check that it is completely in the printer.

1 - 8