Control panel
Network factory default setting (For HL-2070N)
If you wish to reset the print server back to its default factory settings (resetting all information such as the password and IP address information), please follow these steps:
1 Turn off the printer. | 3 |
2Make sure that the front cover is closed and the power cord is plugged in.
3Hold down the Go button as you turn on the power switch. Keep the Go button pressed down until the Toner, Drum and Paper LEDs light up. Release the Go button. Make sure that the Toner, Drum and Paper LEDs are off.
4Press the Go button six times. Make sure that all the LEDs light up to indicate the print server has been reset to its default factory settings.
Network factory default setting with APIPA protocol disabled (For HL-2070N)
If you wish to reset the print server back to its factory default settings with APIPA protocol disabled, please follow these steps:
1Turn off the printer.
2Make sure that the front cover is closed and the power cord is plugged in.
3Hold down the Go button as you turn on the power switch. Keep the Go button pressed down until the Toner, Drum and Paper LEDs light up. Release the Go button. Make sure that the Toner, Drum and Paper LEDs are off.
4Press the Go button seven times. Make sure that all the LEDs light up to indicate the print server has been reset to its default factory settings.
Note
•For more information of APIPA, see the Network User’s Guide or visit http://solutions.brother.com
•You can also disable the APIPA protocol using Web browser, BRAdmin Professional or Web BRAdmin.
3 - 11