HP iPAQ hx4700 Changing TCP/IP Settings, OK, New, Edit, Work, Settings, Settings, Exceptions, IP Address, Connections, The Internet, Dialing Rules, iPAQ Wireless

Using Wi-Fi

3.Select the network name you want to use to either connect to the Internet using an ISP or a Virtual Private Network (VPN) for work. If you need to change or create a new network management name, tap the Edit... or New... button. Tap OK once you have completed this step.

4.From the Connections screen, set up your Dialing Rules and Exceptions and press OK.

5.From the iPAQ Wireless screen, tap the Wi-Fi Settings button > Network Adapters tab.

6.Tap the appropriate adapter to modify the settings. The IP address displays in the IP Address box.

Changing TCP/IP Settings

Note: Most Internet Service Providers (ISPs) and private networks now use dynamically-assigned IP addresses. You will not need to change the Transmission Control Protocol/Internet Protocol (TCP/IP) settings unless your ISP or private network does not use dynamically-assigned IP addresses. If you are not sure if your ISP or private network use dynamically-assigned IP addresses, check with your network administrator.

To change TCP/IP Settings:

1.Contact your ISP or network administrator to determine your IP address, subnet mask, and/or default gateway (if needed).

2.Be sure Wi-Fi is on.

3.From the iPAQ Wireless screen, tap > Settings > Network Adapters tab.

4.In the My network card connects to... dropdown box, tap either The Internet or Work.

Note: If you are connecting to your ISP at home, tap The Internet. If you are connecting to a private network, such as a corporate network at work, tap Work.

User’s Guide 8–9