2.Run PCONSOLE and create or modify your selected Novell print server.
■Configure a printer slot with Type Remote, Other Unknown
(or Other Unknown in 4.x).
■Assign a print queue to the printer slot (printer number).
■Restart your print server at the server console by typing UNLOAD PSERVER and the name of your print server.
■Type LOAD PSERVER and the same print server name.
3.
4.To change an existing printer configuration, highlight the printer you want in the list of printers.
Note | If your printer does not appear in the list of |
| available printers, select a refresh option from the |
| Device Refresh |
|
|
5.Click Device on the menu bar at the top of the main window, then do one of the following:
■Click New to configure a new printer.
-or -
■Click Modify to configure an existing printer.
6.If you are configuring a new printer, select the LAN hardware address of the HP JetDirect print server attached to the new printer, then click Configure. The address of the HP JetDirect print server is listed on the HP JetDirect configuration page.
7.Type the new name of the printer that was created in Step 2. This is the name that will appear on the network.
18 Novell NetWare Networks (Windows 3.1 Client)
EN
