Running the HP JetAdmin Software
The HP JetAdmin software helps the administrator to configure the print server and the spooling system. To run the HP JetAdmin software from the default paths, type the following. If you installed HP JetAdmin in a different directory, the paths might be different.
For
/opt/hpnp/bin/jetadmin
To use HP JetAdmin software in a
Configuring the HP JetDirect Print Server
For information on configuring the HP JetDirect print server with TCP/IP network parameters, refer to the HP JetDirect Administrator’s Guide.
Configuring the Host Spooler
Similar to other serial or parallel connected printers, a network printer (represented by its IP address) must be configured to the local spooler before you can access it.
66 UNIX
EN
