7.If you are using TCP/IP, select one of the following. Otherwise, skip to Step 9.
■Automatically obtain TCP/IP configuration from the DHCP server
■Automatically obtain TCP/IP configuration from the BOOTP server
■Manually specify TCP/IP configuration
8.If you selected Manually specify TCP/IP configuration, then do the following:
■Type the TCP/IP Address
■Type the Subnet Mask
■Type the Default Gateway
9.Click Next to display the Optional properties page.
10.If desired, click Password, then click the Enable configuration password box. If you do not want to enable a configuration password, go to step 11.
■If a password is not currently specified, click the New Password box and type a password of up to 12 characters. The password can be any combination of characters on your keyboard.
■If you are changing the current password, click the Current Password box and type the current password, then click the New Password box and type a new password of up to
12 characters. The password can be any combination of characters.
11.Click Finish, then click OK to complete the configuration.
12.To verify that the configuration is working properly, see the next section “Verifying the Configuration.”
44 Microsoft Windows 95/98 Networks (Peer-to-Peer)
EN
