To Configure the Printer
1.Log onto the network with Supervisor privileges.
2.Click Start, Programs, HP JetAdmin Utilities, then click HP JetAdmin.
3.To change an existing printer configuration, highlight the printer you want in the list of printers.
Note | If your printer does not appear in the list of |
| available printers, select a refresh option from the |
| Device Refresh |
|
|
4.Click Device on the menu bar at the top of the main window, then do one of the following:
■Click New to configure a new printer.
-or -
■Click Modify to configure an existing printer.
5.If you are configuring a new printer, select the LAN hardware address of the HP JetDirect print server attached to the new printer, then click Configure. The address of the HP JetDirect print server is listed on the HP JetDirect configuration page.
6.Type the new name of the printer.
This is the name that will appear on the network. The printer name can contain up to 28 characters and must not be the same as any other print server on the network.
7.Type a general description of the printer (such as the type of printer, options in the printer, and the printer location). This description is optional.
EN | Novell NetWare Networks (Windows 9x & NT/2000 Client) 31 |
