4.If you are configuring a new printer, select the LAN hardware address of the HP JetDirect print server attached to the new printer, then click Configure. The address of the HP JetDirect print server is listed on the HP JetDirect configuration page.
5.If you are using IPX/SPX, type the name of the printer. This is the name that will appear on the network (for example, LJ5_floor2). (If your printer does not appear in the list of available printers, select a refresh option from the Device Refresh
6.Type a general description of the printer (such as the type of printer, options in the printer, and the printer location). This description is optional.
7.Click Next to display the TCP/IP properties page.
8.If you are using TCP/IP, select one of the following. Otherwise, skip to step 10.
■Automatically obtain TCP/IP configuration from the DHCP server
■Automatically obtain TCP/IP configuration from the BOOTP server
■Manually specify TCP/IP configuration
9.If you selected Manually specify TCP/IP configuration, then do the following:
■Type the TCP/IP Address
■Type the Subnet Mask
■Type the Default Gateway
10.Click Next to display the Optional properties page.
