HP Jetadmin Software for OS/2 Configuring a New or Existing Printer, To Configure the Printer

Configuring a New or Existing Printer

You can use HP JetAdmin to configure a printer that was not automatically configured during the CD-ROM software installation. Before you configure the HP JetAdmin software, make sure the following tasks have been performed:

●Internal print servers: The print server is installed in the printer and the printer is connected to a network.

●External print servers: The print server has power and is connected to the printer’s parallel port and network.

●The printer is turned on, is online, and you have printed a JetDirect configuration page.

If you have not printed a configuration page from your printer, see the hardware installation guide for your print server or your printer’s getting started guide for instructions.

To Configure the Printer

1.Log onto the network with Supervisor privileges.

2.Run HP JetAdmin.

3.Click Device on the menu bar at the top of the main window, then do one of the following:

■Click New to configure a new printer.

-or -

■To change an existing printer configuration, highlight the printer you want in the list of printers in the main window, then click Device, Modify.

Note	If your printer does not appear in the list of
	available printers, select a refresh option from the
	Device Refresh pull-down menu.

52 Microsoft Windows NT/2000 Networks (TCP/IP or IPX/SPX)

EN