HP L7500 manual Load the originals, Available symbols for dialing fax numbers some models only

Chapter 3

Available symbols for dialing fax numbers (some models only)

To enter a symbol, such as *, press Symbols repeatedly to scroll through the list of symbols. The following table provides the symbols that you can use in a fax or phone number sequence, fax header information, and speed-dial entries.

Available Description symbols

*Displays an asterisk symbol when required for dialing.

-When auto-dialing, the device enters a pause in the number sequence.

( )	Displays a left or right parenthesis to
	separate numbers, such as area codes,
	for easier reading. These symbols do
	not affect dialing.

WWhen auto-dialing, W causes the device to wait for a dial tone before continuing to dial.

RDuring auto-dialing, the R functions the same as a Flash button on your telephone.

+Displays a plus symbol. This symbol does not affect dialing.

Available when entering

Fax header name, speed-dial names, speed-dial numbers, fax or phone numbers, and monitor dial entries

Fax header name, fax header number, speed-dial names, speed- dial numbers, and fax or phone numbers

Fax header name, fax header number, speed-dial names, speed- dial numbers, and fax or phone numbers

Speed-dial numbers and fax or phone numbers

Speed-dial numbers and fax or phone numbers

Fax header name, fax header number, speed-dial names, speed- dial numbers, and fax or phone numbers

Load the originals

You can load an original for a copy, fax, or scan job in the automatic document feeder or on the scanner glass. Originals that are loaded in the automatic document feeder are automatically fed into the device.

Load an original in the automatic document feeder (ADF)

You can copy, scan, or fax a one-sided or two-sided, single- or multiple-page, A4- or letter-size document by placing it in the document feeder tray.

CAUTION: Do not load photos in the ADF; this might cause damage to your photos.

NOTE: Two-sided legal-size documents cannot be scanned, copied, or faxed using the ADF. Some features, such as the Fit to Page copy feature, do not work when you load your originals in the ADF. You must load your originals on the glass.

The document feeder tray holds a maximum of 50 sheets of plain paper.

30 Use the all-in-one