11.Close the ADF and replace the document feeder tray.

Tips for avoiding jams

Make sure that nothing is blocking the paper path.

Do not overload the trays. For more information, see Understand specifications for supported media.

Load paper properly and when the device is not printing. For more information, see Load media and Load an original in the automatic document feeder (ADF).

When reinserting Tray 2 (optional) into the device, do so gently. Forceful insertion with a full stack of paper may cause sheets to slide up within the device, causing it to jam or pick multiple sheets at one time.

Do not use media that is curled or crumpled.

Always use media that conforms with specifications. For more information, see Select print media.

Make sure the output tray is not overly full.

Make sure media is aligned against the right side of a tray.

Make sure the media length and width guides are adjusted snugly against the media, but do not crinkle or bend it.

Clear jams

197

Page 201
Image 201
HP L7500 manual Tips for avoiding jams