6.The printer checks the substrate in various ways and may ask you to correct problems with skew or tension.
NOTE: You can specify the maximum permitted amount of skew at the front panel: select the icon, then select Substrate handling options > Max skew setting.
7.Wait until the substrate emerges from the printer, as shown below.
NOTE: If you have an unexpected problem at any stage of the substrate loading process, see the Maintenance and troubleshooting guide.
8.If you are loading transparent substrate without opaque borders, you are asked to enter the width of the substrate and the distance of the right edge from the printer's side plate (as indicated by the ruler on the front of the curing module).
9.If you have chosen
10.The printer calibrates the substrate advance.
11.The printer indicates that it is ready for printing.
Take care not to cover the top fans.
Handle the substrate
ENWW | Load a roll into the printer (automatically) | 29 |