Adjusting the Volume

To increase or decrease the sound, press:

■The remote control Volume buttons. Or

The TV Volume buttons.

The indicator bar on the TV shows the increase or decrease.

Muting the sound

1Press the Mute button on the remote control to temporarily turn off the sound.

2Press the Mute button again to restore the sound back to the previous level.

Changing the Picture Mode

Press the Picture button on the remote control to display the currently selected video mode. Keep pressing the Picture button until you reach the desired picture. The Picture modes are:

■Standard: Good for normal viewing conditions with low room lighting.

■Movie: Good for watching movies in a darkened room. Provides a soft, film-like picture.

■Vivid: Good for viewing in a well-lit room, enhances the contrast and sharpness.

■User: Displays the custom settings that you configured in the OSD. For more information about defining the picture settings, see “Using the Picture Menu” on page 30.

Changing Channels

To change to the next higher or lower channel, press:

■The remote control Ch+ or Ch– buttons. Ch+

Ch-

Or

The TV Channel buttons.

To change to another channel, enter a one-digit, two-digit, or three-digit number, or press the channel up or down buttons.

To select a specific channel number (for example, channel 25), complete the following procedure within four seconds:

1Press the 2 button on the remote control.

2Press the 5 button.

3Press Enter.

To select a specific digital channel number (for example, 14-2, complete the following procedure within four seconds):

1Press the 1 button on the remote control.

2Press the 4 button.

3Press the – (dash) button.

4Press the 2 button.

5Press Enter.

Selecting the last channel

Press the Last button on the remote control to view the previous channel that you viewed.

Selecting a favorite channel

You can quickly select a favorite channel by using the Fav button on the remote control.

Press the Fav button on the remote control to view a list of your favorite channels. Press an arrow button to select a channel from the list, and then press OK.

24HP HDTV User’s Guide