The first time you open the favorites list, or after using the Setup Wizard or Auto Scan in the onscreen display Channel menu, the Fav list is empty.

During the first-time Setup Wizard, or an Auto Scan, the TV searches for the TV antenna or cable signal sources, finds all the available channels, and adds them to the channel list. If you skipped or canceled during the initial setup, and have not run the Setup Wizard or the Auto Scan, there are no channels in the channel list. To be able to add channels to the favorites list, the channel must be in the channel list.

To add a channel to the Fav list:

If necessary, first run the Setup Wizard or Auto Scan in the Channel menu; see “Starting the Setup Wizard” on page 41 or see “Searching for channels” on page 33.

1Press the Ch+ or Ch– buttons to select the

channel to view.

Ch+

 

2 Press the Fav button. The list of favorite

 

 

Ch-

channels opens on an empty line, if

 

available.

 

3Press Ch+ to use the empty line, or press an arrow button to select a favorite channel entry that you want to change, and then press Ch+. The current channel is now in the Fav list.

Displaying program information

Press the Info button on the remote control to display a banner with information about the program that you are currently viewing.

n

Sometimes the name of the program is not included in the broadcast. In that case, the program name is not displayed.

Selecting the Input

Source

1Press the Source button on the remote control, or on the TV, to open the list of input sources.

2 Press the up or down arrow button on the remote control, or press the Channel buttons on the TV, to select the input source to view.

3Press OK on the remote control, or press Select on the TV.

Or

Press the Source button again to close the list of input sources without changing the source.

The list of input sources identifies a connector set on the rear of the TV:

■Antenna or Cable is the ANT/Cable In connector. The label shows the scan source selection (Antenna or Cable) of the last channel scan performed by either the Setup Wizard or the Channel menu.

■AV1 is the Standard Definition Input AV Input 1 connector set of S-Vid or Video.

■AV2 is the Standard Definition Input AV Input 2 connector set of S-Vid or Video.

■Component 1 is the Component High Definition Input 1 connector set.

■Component 2 is the Component High Definition Input 2 connector set.

■PC is the PC Input (VGA) connector set.

■HDMI 1 is the Digital High Definition Input connector HDMI 1.

■HDMI 2 is the Digital High Definition Input connector HDMI 2.

■HDMI 3 is the Digital High Definition Input connector HDMI 3 (select models only).

You can change all the labels except Antenna (or Cable). Use the onscreen display Setup menu Input Labels option to change the label in the source list; see “Changing the Input Labels” on page 41.

Operating the TV

Operating the TV 25