To change an input label by using the remote control:

1Press the Menu button to open the OSD. The available menus appear as a list.

2Press the down arrow button to highlight the Setup menu, and then press the OK button.

3Press the down arrow button to move within the menu and highlight the Input Labels option, and then press OK to move into the option.

4Press the down arrow button to highlight the input source that you want to change, and then press the right arrow button. Press the down arrow button to select the new label, and then press OK to enter the change.

5When you are finished, press the Menu button to close the OSD.

Returning to Default Settings

You can use the Default Settings menu to return all settings, including the input labels, to the default value. Select Default Settings, and then press the OK button.

This option does not reset the channels in the Fav and the channel list. These items are cleared only when you run a new channel scan.

42HP HDTV User’s Guide