Framing a group of displays is similar to framing a single display except that you will use some of the straight connectors to cover the gap between adjacent displays.

Figure 3-12Framing an array

Attach corners and straight connectors after the rails are in place.

Figure 3-13Attaching corners and connectors

When you frame an array, the peripheral displays can no longer move independently. For this reason, the following tasks may best be done before framing:

●Color Calibration

●Attaching all cables

●Putting the main power switch in the ON () position

●Horizontal, vertical and depth adjustment of all displays

14 Chapter 3 Setting up the display

ENWW