1

2

 

1

 

 

 

 

2

4

 

3

 

 

 

 

4

3

 

To frame a single display, attach the top rail to the top of the display with three of the large (M4 x 10

mm)screws provided. The rail overlaps the bezel of the display. Attach the bottom, left, and right rails in the same manner, leaving the two small holes at each end open.

Figure 3-10Attaching rails

Attach the four corner pieces with four small (M3 x 5 mm) screws each. These overlap the rails and secure their ends.

Figure 3-11Attaching corners

ENWW

Installing the HP LD4730 Frame System (Sold Separately) 13