2.Put the master power switch (2) into the ON () position. Figure 3-18Turn On Power Switch

3.If you will be using the VGA input for video, and you want to play the audio feed through the external speakers, connect one end of an audio cable (sold separately) to the Audio input jack

(3) and the other end to the Line Out jack on the media player/computer.

NOTE: Before connecting to the AUDIO port on the display, verify what type of Audio Out connection is available on the media player/computer sound card. The Line Out on a media player/computer is used to connect to speakers, including a built-in amplifier (AMP). For additional instructions, refer to the sound card manual.

If the Audio Out on the media player/computer sound card has only Speaker Out, reduce the media player/computer volume before connecting to the AUDIO port on the display.

If the Audio Out on the media player/computer sound card supports both Speaker Out and Line Out, choose Line Out.

Figure 3-19Audio connection

NOTE: The ferrite core can be used to reduce electromagnetic waves when connecting an audio cable. Fit the ferrite core to the audio cable. The ferrite core needs to be separated from the mold by 5 cm (2 in).

Figure 3-20Using the ferrite core

5 cm

ENWW

Connecting cables 17