Level 1 Menu | Level 2 Menu | Level 3 Menu | Description |
|
|
|
|
| IR out |
| Enable — Enable the external IR receiver and IR |
|
|
| support. |
|
|
| Disable — Disable the external IR receiver and IR |
|
|
| support. |
|
|
| The default setting is Disable. |
|
|
|
|
| Firmware Update |
| Current Ver. — Shows the version number of firmware |
|
|
| currently running on the display. |
|
|
| Detected Ver. — Shows the version number of firmware |
|
|
| detected on a USB device plugged into the display. |
|
|
| Yes/No — Choose yes to upgrade firmware on this display. |
|
|
|
|
Color | Color Calibration |
| Enter — Enter the color calibration process. |
Calibration |
|
| Exit — Exit without calibrating color. |
|
|
| |
|
|
| See Tuning color on page 47 for details of the color |
|
|
| calibration process. |
|
|
|
|
| Result |
| When calibration is complete, the display measures the |
|
|
| following parameters with the new correction: |
|
|
| Luminance |
|
|
| Color Temperature |
|
|
| Gamma |
|
|
| R, G, and B coordinates in CIE X,Y color space |
|
|
| The number of hours since calibration is also shown. If the |
|
|
| display has never been calibrated, that fact is shown. |
|
|
|
|
Tile Mode | H Monitors |
| Enter the number of displays in a row of your array. |
|
|
| The range is 1 — 5 and the default is 1. |
|
|
|
|
| V Monitors |
| Enter the number of displays in a column of your array. |
|
|
| The range is 1 — 5 and the default is 1. |
|
|
|
|
| H Position |
| Enter this display's column number, counting left to right. |
|
|
| The range is 1 — 5 and the default is 1. |
|
|
|
|
| V Position |
| Enter this display's row number, counting top to bottom. |
|
|
| The range is 1 — 5 and the default is 1. |
|
|
|
|
| Natural Mode |
| On — Image will overlap the bezel. The result is as though the |
|
|
| composite image was projected onto the video wall. |
|
|
| Off — Image will be contained in the viewing area. The result |
|
|
| is as though the composite picture was cut into separate |
|
|
| pieces laid close to each other. |
|
|
| See Using Tile Mode on page 44 for more detail. |
|
|
| The default setting is Off. |
|
|
|
|
| Reset |
| Returns all tile settings to their defaults. |
|
|
|
|
ENWW | Using the |