After a short period of time, the Lock message will disappear from the displays. At any time, you may press the INFO button on the IR remote control and the Lock message will reappear on the displays not selected to receive the IR commands:

Figure 4-4Lock message from INFO command

Pressing the MENU key on the IR remote control will exit the IR daisy chain mode and unlock all the displays.

Navigating with the infrared remote control

The IR sensor is on the back of the display but will receive IR signals coming from the front. Point the remote control toward the bottom center of the screen. You can also use the external sensor provided, which makes the remote control very easy to use. This is especially true for displays in a video wall. If you have connected multiple displays with IR daisy chain, they will all respond to a key press of the remote. See Controlling displays with IR Daisy Chain on page 32 for more details.

See Identifying remote control buttons on page 10 for details on IR remote control buttons and their functions.

Navigating with the control panel

If you have access to the control panel at the back of the display, you can use it to turn the screen on and off, and to open and navigate the OSD menu.

Figure 4-5Display control panel

INPUT MENU

To change the video source, press the INPUT button, then select the desired source from the menu that opens on the screen.

To bring up the On-Screen Display menu, press the MENU button. Press it again to exit the OSD. Once inside the menu,

●Use the arrow buttons to highlight your choice. Use them to adjust settings as well.

●To accept a highlighted selection or setting, press the INPUT button.

34 Chapter 4 Operating the display

ENWW