Figure 3-34Multiple displays with tile mode
Figure 3-35Daisy chain connection – DisplayPort
Display I n | Display I n | Display I n | Display I n |
Display Out | Display Out | Display Out | Display Out |
Figure 3-36Daisy chain connection -- VGA
To remotely manage and control multiple displays in Tile Mode when using either VGA or DisplayPort video source, either a RS-232 or Network connection may be used with the HP Network Sign Manager.
If using the RS-232 interface, the displays must be daisy chained with RS-232 cables. Attach one end of a RS-232 cable to the RS-232 Input connector of the first display and connect to the serial connector of the media player/computer. Then attach one end of an RS-232 cable to the RS-232 Output connector and the other end to the RS-232 Input connector of the next display and continue to connect the RS-232 cables between each display in the tiled matrix as shown in Figure 3-37 Daisy chain connection – RS232-C on page 26.
ENWW | Connecting multiple displays to one player 25 |
