Level 1 Menu

Level 2 Menu

Level 3 Menu

Description

 

 

 

 

 

ISM Method

 

To prevent the screen from retaining an image that remains

 

 

 

static for a long period of time, choose one of these relief

 

 

 

methods:

 

 

 

● Orbiter— The image moves two pixels every two

 

 

 

minutes. Direction of movement is right, left, up, and then

 

 

 

down, in a continuous cycle.

 

 

 

● Inversion — Inverts the colors every 30 minutes. This

 

 

 

function can be used to fix a ghost or burned-in image.

 

 

 

● White wash — Fills the screen with white. This function

 

 

 

can be used to fix a ghost or burned-in image. Press any

 

 

 

key on the remote control to exit the White Wash function

 

 

 

and return the screen to normal.

 

 

 

● Dot wash — Imposes black dots on the image, moving

 

 

 

them every 5 seconds.

 

 

 

● OFF — No remedy for image retention will be used.

 

 

 

The default setting is Off.

 

 

 

 

 

DDC/CI

 

On — Allows an attached media player/computer to send

 

 

 

control commands to the display.

 

 

 

Off — Control of the display must be done manually, with the

 

 

 

infrared remote control or the buttons on the back of the

 

 

 

display.

 

 

 

The default setting is On.

 

 

 

 

 

Factory Reset

 

Resets all OSD choices to their default factory settings.

 

 

 

User modes will be erased from memory.

 

 

 

 

 

Diagnostic

 

Shows the following information:

 

 

 

Temperature in degrees Centigrade

 

 

 

Ambient light level in Lux

 

 

 

LED Failure: Yes/No

 

 

 

Operating time in hours

 

 

 

 

 

Information

 

Shows the following:

 

 

 

Serial number

 

 

 

SW Version (MNT) — The version of the firmware driver

 

 

 

running on the display.

 

 

 

IP Address (VOE) — The IP Address of the network

 

 

 

connection handling video data to the display.

 

 

 

MAC Address (VOE) — The Media Access Control address

 

 

 

of the network connection handling video data to the display.

 

 

 

IP Address (NSM) — The IP Address of the network

 

 

 

connection handling control data to the display.

 

 

 

MAC Address (NSM) — The Media Access Control address

 

 

 

of the network connection handling control data to the display.

 

 

 

 

42 Chapter 4 Operating the display

ENWW