Removing the Monitor Pedestal Base
You can remove the monitor panel from the pedestal base to install the panel on a wall, a swing arm, or other mounting fixture.
CAUTION: Before beginning to disassemble the monitor, be sure the monitor is turned off and the power and signal cables are both disconnected.
1.Disconnect and remove the signal and power cables from the monitor.
2.Lay the monitor face down on a flat surface covered by a clean, dry cloth.
3.Remove the four pedestal neck screws (1) and lift the pedestal neck (2) off of the monitor panel. Figure
10 Chapter 3 Setting Up the Monitor | ENWW |
