HP M6710 QR490A, M6710 QR504A, 7200 BC746A, 7200 BC745A manual HP Rack and Rack Options

QuickSpecs

HP 3PAR StoreServ 7000 Storage

Configuration Information

The HP 3PAR StoreServ 7000 is compatible with most industry standard 4-post EIA 19 inch racks with square mounting holes, including the HP Intelligent Series Rack and the HP 10000 G2 Series Rack. The HP 3PAR StoreServ 7000 can be factory configured and shipped in a rack or shipped without a rack for field integration into an existing rack. The rack used for factory integration is the HP Intelligent Series Rack.

HP Rack and Rack Options

Factory Integration	Select a rack to house your HP 3PAR StoreServ 7000.
	NOTE: The HP Intelligent Series Rack is the only series supported for factory
	configuration.
Primary Configuration	The HP 3PAR StoreServ 7000 will be configured into an HP Intelligent Series Rack with
Rules	the appropriate power distribution units (PDUs). If other products such as servers or
	back-up products are included in the cab, a different PDU will be added (if required) or
	can be chosen from a list of appropriate offerings shown in the configuration tool. The
	HP Intelligent Series Rack must be purchased for factory configuration. Additional 3PAR
	StoreServ 7000 controller node enclosures and drive enclosures may be ordered for
	multiple subsystem integration at the factory.
	The 3PAR StoreServ 7000 is also supported in HP 10000 G2 Series racks for field
	installation.
	When calculating available U-space, assume that no space will be placed between the
	mounted components. For redundancy, order PDUs in quantities of two. Refer to the
	Configuration and User Guide in the Information Library at the Rack Solutions webpage.
HP Intelligent Series	NOTE: The number of components that will fit in a rack varies and is determined by the
Racks	interior U-space of the rack.
	HP 647 1075mm Shock Intelligent Series Rack	BW912A
	HP 47U 1075mm Side Panel Kit	BW915A
	HP 642 1075mm Shock Intelligent Series Rack	BW904A
	HP 42U 1075mm Side Panel Kit	BW906A
	HP 636 1075mm Shock Intelligent Series Rack	BW896A
	HP 36U 1075mm Side Panel Kit	BW898A
	For more information on the HP rack offerings, please see the following URL:
	http://h18004.www1.hp.com/products/servers/platforms/rackandpower.html.
	For more information on rack options, see: http://www.hp.com/products/rackoptions.
	For more information on PDUs, see:
	http://h18004.www1.hp.com/products/servers/proliantstorage/power-
	protection/pdu.html.
HP PDU Pivot Kit	HP EVA PDU Pivot Kit	AG730A
	Used to reclaim 2U of space in an HP Intelligent Series Rack with HP 3PAR StoreServ
	7000 configurations. This kit allows the PDUs to be placed in the back of the rack
	without requiring any rack U space.
	NOTE: The use of the PDU Pivot Kit is strongly recommended and is the default option
	when orders are configured, as it will save 2U of valuable rack space.
	NOTE: 0D1 will appear after this part number to indicate factory integration where
	appropriate.
Performance Optimized	HP 3PAR StoreServ 7000 Storage is qualified for use in HP Performance Optimized Data
Data Centers	Centers. Go to www.hp.com/go/POD for more information.
	DA - 14433 North America — Version 17 — December 10, 2013	Page 18