QuickSpecs

HP 3PAR StoreServ 7000 Storage

Configuration Information

Step 4 - Choose Drives

Drives are orderable at the time the array is purchased, or can be added in the future when additional capacity is required. Unlike other HP 3PAR StoreServ Storage systems where drives are sold in magazines of four, HP 3PAR StoreServ 7000 drives are sold as single drives. Note that these drives are only compatible with the M6710 and M6720 drive enclosures.

HP 3PAR StoreServ 7000 SAS Drives

HP 3PAR SSDs

HP M6710 100GB

6G SAS SFF (2.5-inch) SLC Solid State Drive

QR502A

 

HP M6710 200GB

6G SAS SFF (2.5-inch) SLC Solid State Drive

QR503A

 

HP M6720 100GB 6G SAS LFF (3.5-inch) SLC Solid State Drive

QR506A

 

HP M6720 200GB 6G SAS LFF (3.5-inch) SLC Solid State Drive

QR507A

 

HP 3PAR StoreServ M6710 400GB 6Gb SAS SFF(2.5-inch) MLC Solid State Drive

QR504A

 

HP 3PAR StoreServ M6720 400GB 6Gb SAS LFF(3.5-inch) MLC Solid State Drive

QR508A

 

HP 3PAR StoreServ M6710 480GB 6G SAS SFF(2.5in) MLC Solid State Drive

E7W54A

 

HP 3PAR StoreServ M6720 480GB 6G SAS LFF(3.5in) MLC Solid State Drive

E7W55A

 

HP 3PAR StoreServ M6710 920GB 6G SAS SFF(2.5in) MLC Solid State Drive

E7W24A

 

HP 3PAR StoreServ M6720 920GB 6G SAS LFF(3.5in) MLC Solid State Drive

E7W25A

HP 3PAR SAS HDDs

HP M6710 300GB

6G SAS 15K rpm SFF (2.5-inch) Hard Drive

QR492A

(Performance HDDs)

HP M6710

450GB

6G SAS 10K rpm SFF (2.5-inch) Hard Drive

QR494A

 

HP M6710

900GB

6G SAS 10K rpm SFF (2.5-inch) Hard Drive

QR496A

 

HP 3PAR StoreServ M6710 600GB 6Gb SAS 10K SFF(2.5-inch) HDD

C8R72A

HP 3PAR NL SAS HDDs

HP M6720

2TB 6G SAS 7.2K LFF (3.5-inch) Nearline Hard Drive

QR499A

 

HP M6720

3TB 6G SAS 7.2K LFF (3.5-inch) Nearline Hard Drive

QR500A

 

HP 3PAR StoreServ M6720 4TB 6G 7.2K LFF(3.5-in) SAS Nearline Hard Drive

H6Z87A

 

HP 3PAR StoreServ M6710 1TB 6Gb SAS 7.2K SFF(2.5-inch) Nearline HDD

QR498A

For each drive type installed in the array, the minimum recommended initial quantity is

SSD and SAS performance HDDs - eight (8) drives* per node pair

Nearline HDDs - twelve (12) drives per node pair

Minimum upgrade quantity is 4 drives per node pair or 2 drives per enclosure, whichever is larger. Best practice is to run Autonomic Rebalance (also known as tunesys) after adding the drives.

RAID 6 is strongly recommended for Nearline drives.

All node enclosures must contain either zero (0) or an even number of drives. All drive enclosures must contain an even number of drives, with a minimum of two. Minimum raw capacity is 1.2TB per node pair.

A best practice is to add equal numbers of drives to all enclosures compatible with the drive type being added.

With a four node configuration, the best practice is to attach the same number and type of drives to each node pair.

Small Form Factor (SFF)-specific configuration practices

SFF drives may be loaded into the Storage Base enclosures, the Upgrade

DA - 14433 North America — Version 17 — December 10, 2013

Page 14