12. Remove the microphone receiver (2) from the clip (3) built into the top cover.
Reverse this procedure to install the top cover.
Speaker assembly
Description | Spare part number |
|
|
Speaker assembly |
|
|
|
Before removing the speaker assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 45).
5. Remove the following components:
a. Hard drive (see Hard drive on page 49)
b. Optical drive (see Optical drive on page 53)
c. Keyboard (see Keyboard on page 57)
d. Switch cover (see Switch cover on page 71)
e. TouchPad (see TouchPad on page 67)
f. Display assembly (see Display assembly on page 75)
g. Top cover (see Top cover on page 80)
82 Chapter 4 Removal and replacement procedures
