4. Remove the PC Card assembly (2).
Reverse this procedure to install the PC Card assembly.
USB/audio board
Description | Spare part number |
|
|
USB/audio board (includes USB cable and audio cable) | |
|
|
Before removing the USB/audio board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 45).
5. Remove the following components:
a. Hard drive (see Hard drive on page 49)
b. Optical drive (see Optical drive on page 53)
c. Keyboard (see Keyboard on page 57)
d. Fan (see Fan on page 61)
e. Heat sink (see Heat sink on page 62)
f. Switch cover (see Switch cover on page 71)
g. TouchPad (see TouchPad on page 67)
h. Display assembly (see Display assembly on page 75)
Component replacement procedures 91
