![](/images/new-backgrounds/1259910/259910119x1.webp)
5.Remove the NFC antenna (see NFC antenna on page 38).
6.Remove the power button board (see Power button board on page 45). Remove the battery:
1.Release the volume button board cable from the retention clips (1) built into the battery.
2.Release the tab (2) built into the bottom cover that secures the WWAN/GPS antenna cables, and then release the antenna cables (3).
3.Detach the WWAN/GPS main transceiver (4) from the bottom cover. (The WWAN/GPS main transceiver is attached to the bottom cover with
4.Remove the six Phillips PM1.3×2.0 screws (5) that secure the battery to the bottom cover.
5.Remove the battery (6).
Reverse this procedure to install the battery.
52 | Chapter 5 Removal and replacement procedures |