WWAN/GPS auxiliary antenna
NOTE: The WWAN/GPS auxiliary antenna are included in the Antenna Kits and include the WWAN/GPS auxiliary antenna cable and transceiver.
Description | Spare part number |
|
|
Antenna Kit for use only in European countries and regions | |
|
|
Antenna Kit for use only in Japan | |
|
|
Antenna Kit for use only in the United States | |
|
|
Before removing the WWAN/GPS auxiliary antenna, follow these steps:
1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2.Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.Disconnect all external devices from the tablet.
4.Remove the display assembly (see Display assembly on page 30), and then remove the following components:
a.NFC antenna (see NFC antenna on page 38)
b.WWAN module (see WWAN module on page 39)
c.Power button board (see Power button board on page 45)
d.Battery (see Battery on page 51)
e.System board (see System board on page 53)
Remove the WWAN/GPS auxiliary antenna:
1.Detach the WWAN/GPS auxiliary antenna transceiver (1) from the bottom cover.
Tablet component replacement procedures | 63 |
