HP Mobile POS G1 Solution, Mobile POS G2 Solution manual

3.Release the ZIF connector (3) to which the right-side credit card reader board cable is attached, and then disconnect the right-side credit card reader board cable (4) from the left-side credit card reader board.

4.Remove the left-side credit card reader board.

5.Detach the right-side credit card reader board cable (1) from the rear cover. (The right-side credit card reader board cable is attached to the rear cover with double-sided adhesive.)

6.Remove the Phillips PM1.9×3.0 screw (2) that secures the right-side credit card reader board to the rear cover.

Retail Jacket component replacement procedures 79