HP Mobile POS G2 Solution, Mobile POS G1 Solution manual Rear-facing webcam

Rear-facing webcam

NOTE: The rear-facing webcam is included in the Webcam/Microphone Kit, spare part number 762828-001.

Before removing the rear-facing webcam, follow these steps:

1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.

2.Disconnect the power from the tablet by unplugging the power cord from the tablet.

3.Disconnect all external devices from the tablet.

4.Remove the display assembly (see Display assembly on page 30).

5.Remove the NFC antenna (see NFC antenna on page 38).

Remove the rear-facing webcam:

1.Disconnect the rear-facing webcam cable (1) from the power button board.

2.Release the rear-facing webcam (2) from the molding built into the bottom cover.

3.Remove the rear-facing webcam (3) and cable.

Reverse this procedure to install the rear-facing webcam.

44 Chapter 5 Removal and replacement procedures