b.Install the clear drain hose by inserting one end of the hose into the condensation collection pan, and then route the other end into the gravity drain collection system catch basin.

NOTE: Position the gravity drain collection system below the condensation collection pan, allowing gravity to draw the water out of the condensation collection pan and into the gravity drain collection system catch basin.

10.Plug the network cable into the RJ-45 connector located above the In and Out water hoses.

11.Guide the other end of the network cable through the bottom of the MCS unit.

IMPORTANT: Do not connect the power cords into a power supply.

12.Plug the primary power cord into the power connector on the left.

Installation 14