HP MPE/iX 6.x Operating System manual Extracting the ODBCLink/SE file, Running the Setup program

ODBCLink/SE Reference Manual Installing ODBCLink/SE on the Client PC

Extracting the ODBCLink/SE file

From your Client PC, double click the self-extracting file.

Note: If you are installing ODBCLink/SE on a number of Client PC’s, after extracting the files you might wish to create installation disks by copying the extracted files onto a diskette.

Running the SETUP program

Note: A problem associated with Microsoft ODBC 2.10 setup causes the setup on a WindowsNT 4.0 system to install as if it was a Windows95 system. We have therefore created two information files to be used with the 32-bit setup program. A batch file copies the appropriate file to odbc.inf depending on the parameters given.

On a WindowsNT system run “infsetup wnt”

On a Windows95 systems run “infsetup w95"

The batch file will read the parameter entered and copy the appropriate file to odbc.inf. Entering infsetup with no parameter specified will simply describe the usage but will not copy the file.

Once the above has been accomplished proceed with the setup program as follows:

Select: Start, Run. The Run window is displayed.

Type: C:\ODBCLinkSE\SETUP.EXE in the command field

Note: C:\ODBCLinkSE\SETUP.EXE is the directory the file was extracted into.

ODBCLink/SE
©M.B. Foster Associates Limited 1995-2000	13