ODBCLink/SE Reference Manual | Appendix D ODBCLink/SE Companion Product |
Installing MBF-Console for MBF-UDALink
The following example uses Reflection File Transfer from an
Note: If you are installing from a CD, go to page 91
Prior to the Reflection File Transfer, you will have to do the following:
⊗Logon as MANAGER.SYS.
⊗Restore DXINSTAL.PUB.SYS from the installation tape.
⊗Run DXINSTAL.PUB.SYS. You will be prompted throughout the installation. Put the tape back on line and reply to any requests. DataExpress will prompt you for a group to reside in. This will be DX.MBFOSTER by default.
⊗If you encounter problems, contact out Technical Support Department at 1-
Note: Create a directory called MBFoster for the client software.
This can be done using MS Explorer.
In the main menu at the top of the Reflection screen,
Select: File from the drop down menu
Select: Transfer… The File Transfer window is displayed.
Move the cursor to the Local File Name field, located at the top left of the File Transfer Window, and type the name of the.exe file
Type: c:\mbfoster\odbccons.exe
Note: If you are installing a demo version of
Place the cursor in the Host File Names field,
Type: odbccons.dx/dxdemo.mbfoster
DX or DXDEMO illustrates that both can be used but only one is entered depending if the version being installed is production or demo. If you are testing a beta version, use DXBETA.
ODBCLink/SE |
|
©M.B. Foster Associates Limited | 89 |
