Using the Channel Menu
To display the Channel menu, press the Menu button on your remote control, select (highlight) the Channel option, and press the Select button.
Using auto memorizing to set up your channels
Auto memorizing scans for a signal for all of the VHF and UHF channels in your area. If a signal is found, it adds the channel to your channel list. Follow these steps to set auto memorizing for your channels:
1Press the Menu button on your remote control.
2Highlight Channel, and press the Select button.
3Highlight Auto Memorizing, and press the Select button.
4Highlight AIR, STD, HRC, or IRC (whichever is in your broadcast area), and press the Select button.
5Highlight Confirm, and press the Select button to begin the auto memorizing process.
6A list of channels that were detected is displayed when the auto memorizing is complete. Press the Exit button to leave the OSM, or use the Up and Down arrow buttons to scroll through your channels.
Programming favorite channels
You can assign the channels you watch most often as your favorite channels. Then you can use the
1Press the Menu button on your remote control.
2Highlight Channel, and press the Select button.
3Highlight Favorite Channel, and press the Select button.
4Use the Up and Down arrow buttons on your remote control to highlight each channel.
5Press the Select button on your remote control to assign a channel as a favorite channel. A yellow dot appears next to the channel number.
6Press the Exit button on your remote to leave the OSM.
7Press the
Adding and deleting channels
You can customize your channel list by adding channels that were not initially detected and by deleting channels you do not ever watch. Follow these steps to add and delete channels:
1Press the Menu button on your remote control.
2Highlight Channel, and press the Select button.
3Highlight Channel Add/Delete, and press the Select button.
12Using the HP HDTV Tuner