Using a CD Changer
Using the CD Changer
Now that your CD Changer is attached to the Music Center, you are ready to begin using it.
Turning the Changer On and Off
The Music Center will automatically turn the CD Changer on or off when the Music Center is powered on or off.
Changer Management
To manage the CD Changer, follow these steps:
1.Press the Setup button on the remote control. The System Setup screen is displayed.
2.Highlight changer management, and press the Select button.
3.On the Setup - Changer Management screen, you can set the lookup options or view the changer statistics.
Changer Lookup Options
The Music Center can look up the CDs in your changer using three different methods: quick lookup, range lookup, or lookup all.
Quick Lookup looks only for slots which have become empty or have been filled since the last time they were checked. The CDs in newly filled slots are then identified.
Range Lookup verifies each slot in a range even if the CD in the slot is already known. This is sometimes used when a set of CDs is removed and then reloaded to the same slots.
Lookup All reads each slot in the changer and identifies it.
IPAQ MUSIC |